FEGIME voice 2.2019

12 / 13

12
NEWSLETTER 02.2019
“HUPlight50combi” is the name of the powerful
LED work lamp from HAUPA. With 4,000 lm
and 50 W, the lamp enables the illumination of
large areas with an angle of 360 °. The newly
developed plastic cover offers glare-free, pure
white diffused light.
The hybrid 2-in-1 technology enables the device
to be operated from two power sources. The
integrated battery (Li-Ion 7.4 V / 6.6Ah) can also
be charged during operation, so that work does
not have to be interrupted by a long charging
process. The light output is adjustable - at full light
intensity, the operating time is about 2 hours. If
HellermannTyton’s “HIS-Pack Dispenser Cartons”
are filled with a 10 m reel of 2:1 thin-wall, heat-
shrink tubing. This general-purpose tubing is
commonly used as an extra layer of electrical
insulation protection and for protection against
corrosion and mechanical abrasion. The product
is available in 10 sizes from 1.2 mm to 25.4 mm
and in four colours (black, red, blue, yellow/
green) or transparent. A practical “HIS Service
Station” comprising a mountable rack plus
special cutter comes in handy in the workshop or
service van to keep lengths and colours tidy and
organised. The HIS heat-shrink tubing product
you reduce the light intensity by 50%, the battery
will supply up to 4 hours’ light.
With splash protection according to IP54, the LED
work lamp is suitable for indoor and outdoor use.
In addition, the extremely resistant housing - made
from highly impact-resistant plastic - enables the
lamp to withstand even rough impacts.
Additional HUPlight50combis can be connected
to the two integrated sockets to illuminate larger
areas and construction sites. These sockets can
also be used as a power source for other devices.
Thanks to its flat base, the lamp can also be
Haupa’s new dome light
“HUPlight50combi” ensures
good light on all construction
sites.
Practical solutions for installers from HellermannTyton.
Super Tough and Bright
Safe Protection and Repairs
Products
Products
placed on almost any surface. The work lamp
can also be hung using the mounting hook on
the underside of the housing. By mounting it on
a tripod (optionally available), areas can be
illuminated even better.
range also includes HIS-3 tubing with a higher
3:1 shrink ratio and adhesive-lined HIS-A tubing.
Both are available in dispenser cartons or as
pre-cut pieces (“HIS-Bag”).
The “LVRK-L Cable Repair Set” is designed for
the easy permanent repair of damaged low-
voltage cables – thus eliminating the need to
fit additional junction boxes or lay new cables.
The repair set comprises:
• 5 heat-shrinkable, adhesive-lined 30 mm
crimp connectors to bridge the damaged
wire,
• one 200 mm length of 4:1 adhesive-lined,
heat-shrink tubing to permanently seal the
repaired section,
• 4 heat-stabilised cable ties to hold the
tubing together whilst shrinking,
• application instructions.
The “H6100 Electrical Hot Air Tool” is ideal for
usewith thin- tomedium-wall heat-shrink products.
This robust heat gun has a powerful 1600Wmotor
yet weighs less than 1000g.
The temperature of the ceramic heating element
is infinitely variable up to +700°C. The H6100
comes in a robust case with three push-on nozzle
accessories and an operating manual. Please
note that this tool is only supplied with a 2-pin
EU plug (Type F).
HIS-Pack Dispenser Cartons LVRK-L Cable Repair Set H6100 Hot Air Tool